Configuring Local Menu Options - Nortel 1150E User Manual

Configuring Local Menu options

Configuring Local Menu options
Note: Many of the options discussed in this section are for
administrator use only; do not make any changes unless instructed
by an administrator.
Your system administrator can establish a password for the Local Tools
menu. In that case, a password prompt dialog box appears when you
attempt to access the Local Tools menu. You must then type the correct
password, using the dial pad, and press the Enter key to access the Local
Tools menu.
Note: In case of an incorrect password, the Local Tools menu does
not open. If this occurs, contact your system administrator.
Your IP Phone 1150E has both local and server-based options. Press the
key twice to access the
Services
into the following submenus:
• "Using the 1. Preferences submenu" on page 82
• "Using the 2. Local Diagnostics submenu" on page 103
• "Using the 3. Network Configuration menu" on page 105
• "Using the 4. Lock Menu" on page 106
If a menu entry has a number in front of it, you can select that entry by
pressing the associated key on the dialpad. For example, in the Local
Tools menu, you can access
on the dialpad.
The function of some keys on the IP Phone varies depending on the
situation. The key functions in the menus are described in
Table 4: Navigation key functions in menus (Part 1 of 2)
Key
arrow keys
Down
arrow keys
Up
80
Local Tools
2. Local Diagnostics
Function
Move the highlight down
Move the highlight up
menu, which is organized
by pressing the 2 key
Table 4.