Replacing an IP Audio Conference Phone 2033
Nortel IP Audio Conference Phone 2033
5
Select the Shift soft key labeled (>>) and press Clear to edit the TN field.
The IP Audio Conference Phone 2033 by default will place you in the units
field of the TN. You can not use backspace to move to the loop, shelf or
card fields.
Two IP Phones cannot share the same TN. You must remove the IP
Audio Conference Phone 2033 that is currently using the TN.
Procedure 52
Replacing an IP Audio Conference Phone 2033
1
Disconnect the IP Audio Conference Phone 2033 that you want to
replace.
2
Follow either Procedure 48 on
Procedure 49 on
configure the IP Audio Conference Phone 2033.
3
Enter the same TN and Node Number as the IP Audio Conference
Phone 2033 you replaced. The system associates the new IP Audio
Conference Phone 2033 with the existing TN.
End of Procedure
IMPORTANT!
page 323
page 331
(dynamic IP assignment) to install and
End of Procedure
IP Phones
Description, Installation, and Operation
Page 339 of 430
(static IP assignment) or