Overview
Introduction
This chapter describes the hardware and firmware features of the Nortel IP
Phone 1120E and provides a brief overview of Session Initiation Protocol
(SIP).
SIP overview
Session Initiation Protocol (SIP) is a signaling protocol used for establishing
multimedia sessions in an Internet Protocol (IP) network.
SIP is a text-based protocol similar to HTTP and SMTP. With the introduction
of SIP to IP Phones, telephony integrates easily with other Internet services.
SIP allows the convergence of voice and multimedia.
IP Phone 1120E with SIP Firmware
The IP Phone 1120E connects to an IP network using an Ethernet
connection. All voice and signaling information is converted into IP packets
and sent across the network.
The IP Phone 1120E can be ordered with UNIStim Firmware installed or
with SIP Firmware installed. UNIStim Firmware and SIP Firmware use the
same hardware, but the model number of an IP Phone 1120E with UNIStim
Firmware is different from the model number of an IP Phone 1120E with
SIP Firmware.
If you have an IP Phone 1120E with UNIStim Firmware, you can convert the
firmware to SIP Firmware. The most recent version of SIP Firmware can be
obtained from Nortel and installed on the IP Phone 1120E.
This guide explains how to:
•
•
Copyright © 2008, Nortel Networks
.
configure the provisioning server and the DHCP server. Note: The
provisioning server is where the firmware and the configuration files for
the IP Phone 1120E reside. This is not the IP Client Manager (IPCM) of
the call server.
convert an IP Phone 1120E with UNIStim Firmware to an IP Phone
1120E with SIP Firmware
SIP Firmware Release 1.1 for IP Phone 1120E Administration
NN43112-300 02.03 Standard
27 May 2008
15