Replacing The Cable Grommet Assembly - ABB OmniCore V250XT Type B Product Manual

5.3.4 Replacing the cable grommet assembly

Location
The illustration shows the location of the cable grommet assembly on the controller.
xx2200002163
Required spare parts
Spare part
Cable grommet asm
Harness network connection
2xM12
Harness network connection
1xM12
Blind plate
Harness Ethernet comm. 5xM12
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Note
The end user needs to install proper grommets according to the diameter of the
cables which need to go through the grommet.
Incorrect use of grommets will affect ingress protection, EMI/EMC and
temperature.
It is recommended to use icotek KT grommet.
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT Type B via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2023-2023 ABB. All rights reserved.
5.3.4 Replacing the cable grommet assembly
Article number Note
3HAC066396-001
3HAC084125-001
3HAC084103-001
3HAC069954-001
3HAC070894-001
5 Repair
Continues on next page
303