Replacing The Conveyor Tracking Module (Ctm) - ABB OmniCore V250XT Type B Product Manual

5.2.16 Replacing the conveyor tracking module (CTM)

Location
The illustration shows the location of the conveyor tracking module in the controller.
xx2300001840
Required spare parts
Spare part
Conveyor tracking module [3103-
1]
CONNECTOR KIT - DSQC2000
Harness 24V_CTM
Ethernet harness for CTM
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Required documents
Document
Circuit diagram - OmniCore
V250XT, rev 04 or later
Application manual - Conveyor
tracking
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT Type B via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2023-2023 ABB. All rights reserved.
5.2.16 Replacing the conveyor tracking module (CTM)
Article number
3HNA027579-001
3HNA029345-001
3HAC084173-001
3HAC084195-001
Article number
-
-
Article number
3HAC074000-008
3HAC066561-001
5 Repair
Note
DSQC2000
Power cable of CTM
Note
Content is defined in section
Standard toolkit for controller on
page 426.
Note
Continues on next page
275