ABB OmniCore V250XT Type B Product Manual page 277

2
Refitting the conveyor tracking module (option)
Refitting the conveyor tracking module (option)
1
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
5.2.16 Replacing the conveyor tracking module (CTM)
Action
Pull on the lower side of the conveyor
tracking module slightly and take out the
conveyor tracking module.
Note
The conveyor tracking module is secured
by the buckles.
Be careful with the direction of the
buckles when doing assembling/disas-
sembling work.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
© Copyright 2023-2023 ABB. All rights reserved.
Note/Illustration
xx2200001844
xx1900001913
Note/Illustration
Continues on next page
5 Repair
Continued
277