ABB OmniCore V250XT Type B Product Manual page 287

Refitting the break resistor bleeder
Refitting the break resistor bleeder
1
2
3
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Refit the break resistor bleeder and se-
cure the screws.
© Copyright 2023-2023 ABB. All rights reserved.
5.2.18 Replacing the break resistor bleeder
Note/Illustration
Location of wrist strap button:
xx2200001817
xx2200001074
Continues on next page
5 Repair
Continued
287