ABB OmniCore V250XT Type B Product Manual page 270

5 Repair
5.2.14 Replacing the additional drive unit
Continued
2
3
4
Concluding procedure
1
2
270
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Refit the additional drive unit and secure
with the screws.
Reconnect any connectors disconnected
at removal.
Action
Close the door.
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 173.
© Copyright 2023-2023 ABB. All rights reserved.
Note/Illustration
Location of wrist strap button:
xx2200001817
Screws: Torx pan head screw M4x8 (4 pcs)
Tightening torque: 2 Nm
xx2200001375
Note/Illustration
Closing the door on page
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
185.