ABB OmniCore V250XT Type B Product Manual page 251

3
Removing the power unit
1
2
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Action
Disconnect all connectors from the unit
to be replaced.
Remove the screws and pull the power
unit out from the two guiding pins on the
mounting plate.
CAUTION
Only the sheet metal on the power unit
can be used for holding.
Do not touch the connectors or the filter
on the power unit.
© Copyright 2023-2023 ABB. All rights reserved.
5.2.11 Replacing the HVLP power unit (DSQC3072)
Note/Illustration
Location of wrist strap button:
xx2200001817
Note/Illustration
xx2300001492
5 Repair
Continued
Continues on next page
251