ABB OmniCore V250XT Type B Product Manual page 315

3
4
5
6
7
8
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
5.3.5 Replacing the Ethernet outlet connector with cable
Action
Remove the attachment screws on the
door.
Turn the locking ring anti-clockwise to
remove the connector.
Push the Ethernet outlet connector with
cable into the cabinet.
Disconnect all connectors from the unit
to be replaced.
Remove the cables out from the clips in
the cabinet carefully.
Note
Make records about the sequence that
cables are removed. The cables need to
be installed in the same position.
Take the Ethernet outlet connector with
cable out from the upper side.
© Copyright 2023-2023 ABB. All rights reserved.
Note/Illustration
xx2100000852
xx2100000852
Continues on next page
5 Repair
Continued
315