ABB OmniCore V250XT Type B Product Manual page 129

Installing the additional drive unit
1
2
3
4
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Fit the additional drive unit and secure
with the screws.
Connect:
• T4.X7 -X12, T4.X15
• T4.X17 - A1.X2
• T4.X13 - A1.X11
• T4.X5 - A1.X4
• T4.X3 - A1.X12
• T4.X1 - A1.X5
© Copyright 2023-2023 ABB. All rights reserved.
3 Installation and commissioning
3.7.4 Installing additional drive units
Note/Illustration
Location of wrist strap button:
xx2200001817
Screws: Torx pan head screw M4x8 (4 pcs)
Tightening torque: 2 Nm
xx2200001375
Continues on next page
Continued
129