Location of incoming mains connection
xx2200001755
Connection of protective earth
There are two options to connect the cabinet to protective earth:
xx2200001756
Required equipment
Equipment
Main connection cable (three-phase)
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
3.5.6 Connecting incoming mains and protective earth to the controller
•
PE0 on front panel.
•
PE1 and PE2 on X0 (incoming mains connector).
PE0
Note
All connections between the cabinet and protective earth must comply with the
local electrical requirements.
© Copyright 2023-2023 ABB. All rights reserved.
3 Installation and commissioning
Note
L1, L2, L3, PE1, PE2
Details see
Fitting the connector
for incoming mains on page
Continues on next page
Continued
PE1
PE2
82.
85