I/O System; Available Industrial Networks - ABB OmniCore V250XT Type B Product Manual

3 Installation and commissioning

3.6.1 Available industrial networks

3.6 I/O system

3.6.1 Available industrial networks
General
Fieldbus connections
There is a slot available for installing a DeviceNet M/S board on the main computer.
The software based fieldbuses are connected directly to one of the Ethernet ports.
xx2300001738
Available board
The following master board is available.
Description
DeviceNet M/S
Continues on next page
114
Note
Two industrial network masters can be run in parallel on the OmniCore controller.
It is the responsibility of the integrator to verify the behavior when two masters
are used in one OmniCore.
© Copyright 2023-2023 ABB. All rights reserved.
Article number Type designation
3HAC085254-001 DSQC1096
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A