Installing The Safety Digital Base Device - ABB OmniCore V250XT Type B Product Manual

3 Installation and commissioning

3.7.2 Installing the safety digital base device

3.7.2 Installing the safety digital base device
Location
The illustration shows the location of the safety digital base device in the controller.
xx2300001819
Required spare parts
Spare part
DSQC1042 Extended safety
Connectors Safety I/O
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Required documents
Document
Circuit diagram - OmniCore
V250XT, rev 04 or later
Continues on next page
120
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT Type B via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2023-2023 ABB. All rights reserved.
Article number Note
3HAC062908-001 DSQC1042
3HAC069538-001
Article number Note
- Content is defined in section
Standard toolkit for controller on
page
-
Article number Note
3HAC074000-008
Product manual - OmniCore V250XT Type B
426.
3HAC087112-001 Revision: A