Installing External Devices - ABB OmniCore V250XT Type B Product Manual

3.8 Installing external devices

General
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
WARNING
Only electrical equipment operating within a rated voltage range of 0 to 24 V DC
is allowed on the door of the controller.
Available current supplied to or from this equipment must not exceed 8 A under
any condition of load, including short circuit.
© Copyright 2023-2023 ABB. All rights reserved.
3 Installation and commissioning
3.8 Installing external devices
159