ABB OmniCore V250XT Type B Product Manual page 142

3 Installation and commissioning
3.7.7 Installing the cable grommet assembly
Continued
Removing the slot cover (baseline)
1
2
Refitting the cable grommet assembly
Refitting the cables to the cable grommet assembly
1
Continues on next page
142
Action
Remove the attachment screws.
Take out the cover from the inside of the
controller.
Action
Insert and equip the cable to the corres-
ponding KT grommet.
© Copyright 2023-2023 ABB. All rights reserved.
Note/Illustration
xx2100001282
Note/Illustration
xx1900002337
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A