ABB OmniCore V250XT Type B Product Manual page 305

Removing the cable grommet assembly
1
2
3
4
Releasing the cables from the cable grommet assembly
1
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Action
Remove the cables out from the clips in
the cabinet carefully.
Note
Make records about the sequence that
cables are removed. The cables need to
be installed in the same position.
Remove the attachment screws on the
cover.
Push the cable grommet assembly into
the cabinet.
Take the cable grommet assembly out.
Action
Unscrew the cable entry frame from the
enclosure wall.
© Copyright 2023-2023 ABB. All rights reserved.
5.3.4 Replacing the cable grommet assembly
Note/Illustration
xx2100000845
Note/Illustration
xx1900002332
Continues on next page
5 Repair
Continued
305