ABB OmniCore V250XT Type B Product Manual page 235

Removing the main computer assembly
1
2
3
Refitting the main computer assembly
Refitting the main computer assembly
1
2
3
4
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Action
Remove any cable ties.
Disconnect all connectors from the unit
to be replaced.
Remove the main computer assembly
from the mounting plate.
ELECTROSTATIC DISCHARGE
(ESD)
The unit must be maintained in an ESD-
safe environment.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
ELECTROSTATIC DISCHARGE
(ESD)
The unit must be maintained in an ESD-
safe environment.
Refit the assembly onto the mounting
plate and tighten the screw.
Reconnect any connectors disconnected
at removal.
© Copyright 2023-2023 ABB. All rights reserved.
5.2.8 Replacing the main computer
Note/Illustration
xx2200001089
Note/Illustration
xx2200001089
Continues on next page
5 Repair
Continued
235