ABB OmniCore V250XT Type B Product Manual page 320

5 Repair
5.3.6 Replacing the LED indicator
Continued
Removing the LED indicator
1
2
3
4
Refitting the LED indicator
Refitting the LED indicator
1
2
3
Continues on next page
320
Action
Loose the attachment screws locking the
cable.
Remove the terminals (X1&X2) of the
cable from the lamp.
Turn the MON_LAMP screw anti-clock-
wise to remove the screw.
Take the LED indicator out.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Insert the LED indicator into the cover
from outer side of the door and the screw
from inner side and screw them up.
© Copyright 2023-2023 ABB. All rights reserved.
Note/Illustration
xx1900001926
Note/Illustration
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A