Table of Contents
Advertisement
4 Maintenance
4.3.2 Cleaning of the controller cabinet
4.3.2 Cleaning of the controller cabinet
Required equipment
Equipment, etc.
Vacuum cleaner
Cleaning considerations
This section specifies some special considerations when cleaning the controller.
166
•
Always use ESD protection.
•
Always use cleaning equipment as specified above. Any other cleaning
equipment may shorten the life of paint work, rust inhibitors, signs, or labels.
•
Always make sure that all protective covers are fitted to the controller before
cleaning.
•
Never remove any covers or other protective devices when cleaning the
outside of the controller.
•
Never use compressed air or spray with a high pressure cleaner.
•
Never leave the door open when cleaning the exterior.
© Copyright 2023-2023 ABB. All rights reserved.
Note
ESD protected
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Advertisement
Table of Contents
Troubleshooting
