ABB OmniCore V250XT Type B Product Manual page 286

5 Repair
5.2.18 Replacing the break resistor bleeder
Continued
Removing the break resistor bleeder
1
2
3
4
5
Continues on next page
286
Action
Remove the cable ties.
Disconnect all connectors from the unit
to be replaced.
Remove the screw holding the break
resistor bleeder bracket.
Remove the screws holding the break
resistor bleeder.
Remove the break resistor bleeder and
pull the cables through the opening.
© Copyright 2023-2023 ABB. All rights reserved.
Note/Illustration
xx2200001073
xx2200001074
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A