Table of Contents
Advertisement
Recommended working procedure
If the FlexPendant starts but does not display the main interface during the start-up,
use this procedure to troubleshoot what might cause the problem.
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
7.2.5 Problem starting or connecting the FlexPendant
Action
DANGER
Troubleshooting on the controller while powered on must be performed by personnel
trained by ABB or by ABB field engineers.
© Copyright 2023-2023 ABB. All rights reserved.
7 Troubleshooting
Continued
Continues on next page
359
Advertisement
Table of Contents
Troubleshooting
