Abb Connect (Abb Ability) - ABB OmniCore V250XT Type B Product Manual

2 Controller description

2.8 ABB Connect (ABB Ability)

2.8 ABB Connect (ABB Ability)
The OmniCore™ controller hardware is delivered with a standard mobile connection
(Cellular data connection), or WIFI modem and/or Ethernet connection.
Cellular data connection
If the ABB Ability™ OmniCore™ controller hardware is delivered together with a
standard, free of charge (machine-to-machine or M2M) cellular data connection,
it will automatically establish a connection to the ABB Ability™ digital platform
once the power switch of the ABB Ability™ OmniCore™ controller hardware has
been turned on and has been connected. After the establishment of the connection
there will be a data flow from the OmniCore™ controller hardware to the ABB
Ability™ digital platform.
ABB does not warrant or guarantee an available, stable, uninterrupted, and
interference free connection through the standard cellular data connection. This
is dependent on the availability and quality of the cellular data signal as provided
by the telecommunications carrier on the location where the ABB Ability™
OmniCore™ hardware is installed. The cellular data connection is to be used solely
in connection with the ABB Ability™ OmniCore™ controller hardware and excludes,
without limitation, voice services, web browsing, music downloading and other
services that are not traditionally considered as machine to machine (M2M), but
human-oriented telecommunication services.
ABB has established and maintains a formal information and cybersecurity
procedures which includes commercially reasonable technical and organizational
measures, in order to protect the data against security breaches, accidental or
unlawful destruction, loss, alteration, and unauthorized disclosure of, or access to
the data.
The cellular data connection is not required for the operation of the hardware and
the connectivity settings can be adjusted and turned off at any given time. Detailed
information on the mobile connection is further described in the service description
that can be downloaded from the following web location:
https://share.library.abb.com/api/v4?cid=9AAC910011&dk=Manual
Continues on next page
50
Note
The content of this section is only available in English.
Note
ABB Connect is the new name for previously known ABB Ability. During a period
of time, both ABB Connect and ABB Ability will appear on our products.
© Copyright 2023-2023 ABB. All rights reserved.
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A