Troubleshooting The Flexpendant - ABB OmniCore V250XT Type B Product Manual

7.3.2 Troubleshooting the FlexPendant

Procedure
The procedure below describes what to do if the FlexPendant does not work
correctly.
1
2
3
4
5
For more information on the FlexPendant, see Operating manual - OmniCore.
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Action
Try resetting the FlexPendant using the reset
button located next to the USB port.
If the FlexPendant is not responding or does not
operate correctly, see Problem starting or con-
necting the FlexPendant on page
Check the cable for connections and integrity.
Check the 24 V power supply.
Read the error event log message and follow any
instructions of references.
© Copyright 2023-2023 ABB. All rights reserved.
7 Troubleshooting
7.3.2 Troubleshooting the FlexPendant
Note
See Operating manual - Omni-
Core.
Note
358.
If protective gloves are used, these
must be compatible with touch-
screens when using the FlexPend-
ant.
369