ABB OmniCore V250XT Type B Product Manual page 259

Removing the DSQC 634 power supply
Preparations
1
2
3
Removing the power supply
1
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
Open the door.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Action
Remove the end clamp besides the
power supply with a screwdriver.
© Copyright 2023-2023 ABB. All rights reserved.
5.2.12 Replacing the power supply
Note/Illustration
Opening the door on page
Location of wrist strap button:
xx2200001817
Note/Illustration
xx2200002011
Continues on next page
5 Repair
Continued
184.
259