ABB OmniCore V250XT Type B Product Manual page 221

2
3
Refitting the Connected Services gateway
Refitting the Connected Services gateway
1
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Action
Disconnect the free ends of the 24V ad-
apter harness:
• Wire K7-W201 from the 24V (V+)
connection on the Connected
Services gateway.
• Wire K7-W202 from the 0V (V-)
connection on the Connected
Services gateway.
Carefully lift the Connected Services
gateway slightly and then pull it out from
the bracket.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
© Copyright 2023-2023 ABB. All rights reserved.
5.2.5 Replacing the 4G Connected Services gateway
Note/Illustration
xx2300000753
Note
Press down the white button with a sharp
object while pulling out the wire.
Note/Illustration
5 Repair
Continued
Continues on next page
221