Replacing The Fasten Strip - ABB OmniCore V250XT Type B Product Manual

5.4.3 Replacing the fasten strip

Location
The illustration shows the location of the fasten strip on the FlexPendant.
xx1900000771
Required spare parts
Spare part
Fasten strip
Replacing the fasten strip
1
2
3
4
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT Type B via myABB Business Portal,
www.abb.com/myABB.
Action
Open the velcro on the fasten strip.
Take the fasten strip out from the holes.
Insert the new fasten strip into the holes
one by one.
Secure the velcro in a suitable length.
© Copyright 2023-2023 ABB. All rights reserved.
5.4.3 Replacing the fasten strip
Article number Note
3HAC065419-001
Note/Illustration
5 Repair
329