ABB OmniCore V250XT Type B Product Manual page 107

Parameter
Voltage tolerance
Max output current
For connection details, see Circuit diagram - OmniCore V250XT, rev 04 or later,
3HAC074000-008.
Customer cable layout
It is recommended to use multicore cable for the customer connection.
The cables connected by customer to the 24 V terminal block should go through
the cable grommet and fasten on the cabinet.
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Value
-3% ~ +10%
4 A
Note
The 24 V terminal block power supply is isolated from the internal logical circuit
of the controller.
Note
The diameter of the cables must match the diameter of the grommet.
Incorrect installation will affect the ingress protection.
It is recommended to use icotek KT grommet.
© Copyright 2023-2023 ABB. All rights reserved.
3 Installation and commissioning
3.5.9 Descriptions for connectors
Continued
107