ABB OmniCore V250XT Type B Product Manual page 294

5 Repair
5.3.2.1 Replacing the motor connector
Continued
2
3
4
5
Refitting the motor connector
Refitting the motor connector
1
Continues on next page
294
Action
Remove the attachment screws on the
connector.
Push the motor connector into the cabin-
et.
Take the motor connector cable out from
the velcro in the cabinet.
Note
Make records about the sequence that
cables are removed. The cables need to
be installed in the same position.
Take out the motor connector.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
© Copyright 2023-2023 ABB. All rights reserved.
Note/Illustration
xx2200001982
Note/Illustration
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A