ABB OmniCore V250XT Type B Product Manual page 209

3
4
Concluding procedure
1
2
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Action
Hook up the Ethernet extension switch
to the bracket and then push the switch
into position.
Note
During the installation, there should be
no gap between the upper surface of the
Ethernet extension switch and the lower
surface of highest bracket on the main
computer.
xx1800000972
Reconnect any connectors disconnected
at removal.
Action
Close the door.
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 173.
© Copyright 2023-2023 ABB. All rights reserved.
5.2.3 Replacing the Ethernet switch (DSQC1035)
Note/Illustration
xx2300001835
Note/Illustration
Closing the door on page
5 Repair
Continued
185.
209