ABB OmniCore V250XT Type B Product Manual page 230

5 Repair
5.2.7 Replacing the safety digital base device
Continued
Removing the safety digital base device
Preparations
1
2
3
Removing the safety digital base device
1
2
Continues on next page
230
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
Open the door.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Action
Disconnect all connectors from the unit
to be replaced.
Push the buckle of the digital base
slightly and take out the digital base.
© Copyright 2023-2023 ABB. All rights reserved.
Note/Illustration
Opening the door on page
Location of wrist strap button:
xx2200001817
Note/Illustration
xx2200001972
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
184.