ABB OmniCore V250XT Type B Product Manual page 193

3
4
5
Concluding procedure
1
2
3
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Action
Place the external fan in the bracket and
secure it with the screws and cable ties.
Position the fan bracket in the controller
and secure the screws.
Reconnect any connectors disconnected
at removal.
Action
Refit the rear cover of the controller.
Make sure that the filter cover plate is
correctly positioned.
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 173.
© Copyright 2023-2023 ABB. All rights reserved.
5.2.2.1.1 Replacing the external fans
Note/Illustration
xx2200001064
xx2200001063
Note/Illustration
Refitting the rear cover on page
5 Repair
Continued
187.
193