ABB OmniCore V250XT Type B Product Manual page 335

Refitting the measurement unit
1
2
3
4
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Action
Refit the measurement unit on the
mounting plate and tighten the screws.
Put the measurement unit and mounting
plate in the box.
Refit the screws at the front of the box.
Reconnect any connectors disconnected
at removal.
© Copyright 2023-2023 ABB. All rights reserved.
5.5.2 Replacing the measurement unit
Note/Illustration
xx2300001706
xx2300001705
Continues on next page
5 Repair
Continued
335