ABB OmniCore V250XT Type B Product Manual page 302

5 Repair
5.3.3 Replacing the HMI signal (FlexPendant) connector
Continued
7
Concluding procedure
1
2
302
Action
Secure it with the screws.
Action
Close the door.
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 173.
© Copyright 2023-2023 ABB. All rights reserved.
Note/Illustration
Screws: Torx pan head screw M4x8 (3 pcs)
Tightening torque: 1.7 Nm±10%.
xx2100000830
Note/Illustration
Closing the door on page
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
185.