Replacing Parts On The Flexpendant; Replacing The Power Cable And Power Cable Cover - ABB OmniCore E10 Product Manual

5.4 Replacing parts on the FlexPendant

5.4.1 Replacing the power cable and power cable cover

Location
The illustration shows the location of the power cable, power cable gasket, and
power cable cover in the FlexPendant.
xx1800001154
A
B
Required spare parts
Spare part
Harness TPU adapter
Required tools and equipment
Equipment
Standard toolkit
Product manual - OmniCore E10
3HAC079399-001 Revision: C
A
Power cable cover
Power cable
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore E10 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2019-2022 ABB. All rights reserved.
5.4.1 Replacing the power cable and power cable cover
Article number
3HAC077870-001
Article number
-
5 Repair
B
Note
Note
Content is defined in section
Standard toolkit for controller on
page 202.
Continues on next page
157