ABB OmniCore V250XT Type B Product Manual page 257

2
3
Refitting the DSQC 609 power supply
Refitting the power supply
1
2
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Action
Disconnect all connectors from the unit
to be replaced.
Remove the screw and the power supply.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
© Copyright 2023-2023 ABB. All rights reserved.
5.2.12 Replacing the power supply
Note/Illustration
xx1900001908
Note/Illustration
Location of wrist strap button:
xx2200001817
Continues on next page
5 Repair
Continued
257