Wago Webserver I/O Field; Table 26 Function Overview For The Wago I/O Field Webserver For Digital Input/Output Modules - WAGO 765-1503/100-000 Product Manual

765-1503/100-000
Note
Parameters via EtherNet/IP are always rewritten upon restart
If a connection is used for which the EtherNet/IP scanner transfers parameters to the
module, the scanner transfers the configuration and parameters to the module every time
the EtherNet/IP communication starts up.
Port configuration parameters that were set by the WAGO I/O Field Webserver, the
WAGO I/O Field app or the OPC UA client are overwritten.
If you have changed parameters of the port configuration via the WAGO I/O Field Web-
server, WAGO I/O Field App, the WAGO IO-Link Configurator or the OPC UA client,
please note that these changes are initially applied by the module, but the Ethernet/IP
scanner overwrites the port configuration again at the next start-up. If you want to change
parameters of the port configuration, set them in the configuration software of the Ether-
net/IP scanner.

5.5.2 WAGO Webserver I/O Field

The WAGO I/O System Field module has an integrated Webserver. It can be accessed
with a standard Web browser in order to use the following functions:
• Display port information for ports X01, X02 etc.
• Display and modify module settings.
• User setup and management, as well as user login and logout
• Reset module to factory settings and restart firmware.
• Simulating inputs; forcing outputs
Examples of port information include:
• Display current measured values for the digital outputs: temperature, voltage, current
and state on pins 1, 2 and 4
• Display the status information for the entire port
• Configure ports, e.g. set operating mode
• Show process data
The module settings include:
• Select method for obtaining IP address
• Select the origin of the configuration data used
• Display and enter maintenance information
• Reset module to factory settings.
• Load firmware onto the module
• Display and set parameters for Bluetooth
• Update Bluetooth
Function overview
The following overview shows the functions offered by WAGO Webserver I/O Field that is
integrated into the product and the menu items/tabs in the user interface that can be used
to address these functions:
Menu
Dashboard
Product manual | Version: 2.0.0
16DO FLD EI DC 24V 2.0A
®
firmware
Table 26: Function Overview for the WAGO I/O Field Webserver for Digital Input/Output Modules
Tab
-
®
connection to the module
Description Section
Display product informa-
tion
Functions
29