Installation Requirements; Installing The Software On Windows Nt/Windows 2000 - ADIC Scalar 100 User Manual

SERVER
The system used for the Server does not need to be used as a Client and can be placed in a
locked closet. It does need network access to the SNCs it will be managing, so appropriate
routes will have to be set on that system and on the SNCs.
CLIENT
The Client system can be located anywhere, as long as it can connect to the Server system
using TCP/IP.

Installation Requirements

Minimum configuration guidelines are presented for each system platform in the readme
file located in the SANMGMT folder on the CD-ROM. For an updated list of supported
platforms and installation instructions, visit "Service and Support" at www.adic.com.
An example of the installation requirements for Windows NT/Windows 2000 is listed
below.

Installing the Software on Windows NT/Windows 2000

Server System Requirements
• Windows NT 4.0 Server or Workstation, Service Pack 6a or Windows 2000
• Minimum memory: 96MB
• Free hard disk space: 40MB
• Ethernet with TCP/IP protocol installed
Client System Requirements
• Windows NT 4.0 Server or Workstation, Service Pack 6a or Windows 2000
• Minimum memory: 96MB
• Free hard disk space: 30MB
• Ethernet with TCP/IP protocol installed
1. Log on to the target machine with administrator privileges.
2. Insert the CD and run MC272WIN.exe from the x:\NT\SANMGMT directory, where
x is the letter of your CD-ROM drive.
Other Installation Issues
page 39