ADIC Scalar 100 User Manual page 226

mapShowDevs
The SNC maintains a cross-reference map of device addresses. Information about the
presently attached and available devices in the map can be displayed using the
mapShowDevs command.
SN60023 > mapShowDevs
devId Type Chan iId iLun UID
--------------------------------------------------------------
000 SNA 127 127 127 00000060.450d00c0 001 000 c0ec2600h 00000000h
009 SCSI 002 005 000 09000060.450d00c0 255 255 c1f9e090h 00000000h
010 SCSI 002 005 001 0a000060.450d00c0 255 255 c0ad2590h 00000000h
012 SCSI 001 006 000 0c000060.450d00c0 255 255 c1ffdf10h c1ffdc80h
value = 0 = 0x0
SN60023 >
page 212
Type The type of interface where the device is connected.
SNA indicates an internal device. SCSI or Fibre Channel
indicate I/O interfaces.
Chan The channel number of the interface where the device is
attached
TId Target ID mapping for SCSI Initiators
TLun Target LUN mapping for SCSI Initiators
UID For a Fibre Channel interface, the Unique ID of the
device. For SCSI interface, the SNC's Unique ID.
Type The type of interface where the device is attached to the
SNC.
Chan The channel number of the interface
iId For a SCSI interface only - device ID of the device
iLun For a SCSI interface only – Logical unit number of the
device.
UID For a Fibre Channel interface – Unique ID of the device.
For SCSI interface, a constructed Unique ID based on
the SNC's Unique ID.
tId Target ID mapping for SCSI Initiators
tLun Target LUN mapping for SCSI Initiators
Handle An internal pointer used for some diagnostic operations.
Itl An internal pointer used for some diagnostic operations.
tId tLun Handle Itl
mapShowDevs