ADIC Scalar 100 User Manual page 244

sfmNameSet [hostindex],"name string"
The sfmNameSet command sets the host name field to the specified "name string" for
the specified host connection index. The following command example shows setting the
host name for host Id 1 to "LANDERS". Existing hostindex and name values can be
determined by looking at the "Id" and "Host Name" columns in the output of the
sfmShow -1 command.
SN60023 > sfmNameSet 1,"LANDERS"
value = 0 = 0x0
SN60023 >
sfmShow [hostIndex]
The sfmShow command displays information about hosts that have been registered with
Scalar Firewall Manager based on the value of hostIndex.
Hostindex
-1
0
N (1-48)
The following command example shows SFM information for the hosts that have been
registered by SFM. Hosts that have the Host Registration Service running with periodic
re-registration are shown with a status of Periodic. One of the hosts has more than one
Fibre Channel connection to the SNC.
SN60023 > sfmShow -1
SFM State: Active
Id World Wide Name St. Typ HexFlags Status Host Name Host Type
Host Connection
--- ----------------- --- --- -------- --------- ---------- --
001 200000e0.8b0057d8 000 001 00000000 Online LANDERS NT 4.0
SP5 ScsiPort6 [0:0:0](QLA2200)
002 200000e0.8b16014d 000 001 00000000 Periodic SUPERIOR NT 4.0
SP5 ScsiPort7 [0:0:0](QLA2200)
003 200000e0.8b160152 000 001 00000000 Offline SUPERIOR NT 4.0
SP5 ScsiPort7 [0:0:0](QLA2200)
value = 0 = 0x0
SN60023 >
page 230
Tip: You can enter sfm as a shortcut for sfmShow -1.
Displays brief list of all known host connections
Full display of all known host connections, and
if online displays a list of all LUNs available
to that connection
Display the full information for the host N only
Meaning
sfmNameSet [hostindex],"name string"