tzSet
The tzSet command sets the timezone offset from Greenwich Mean Time.
SN60023 > tzSet "PDT"
TZ Set TIMEZONE
value = 0 = 0x0
SN60023 >
udpstatShow
The udpstatShow command displays UDP statistics for the Ethernet network.
Interpreting these statistics requires detailed knowledge of Internet networking protocols.
This information may be useful to the LAN administrator.
SN60023 > udpstatShow
UDP:
8514 total packets
8445 input packets
69 output packets
0 incomplete header
0 bad data length field
0 bad checksum
8383 broadcasts received with no ports
0 full socket
value = 15 = 0xf
SN60023C >
uptime
The uptime command displays the elapsed time since the last boot of the SNC.
SN60023 > uptime
Elapsed time since reset 4d:23h:12m:46s:10t
value = 10 = 0xa
SN60023 >
The example indicates that 4 days, 23 hours, 12 minutes, 46 seconds and 10 clock ticks
have elapsed since the SNC was last booted. There are 60 ticks per second.
user
The userAdd,userDelete, and userList commands provide control of the user
list. The persistent address map file can be sent to the SNC or retrieved from it using FTP.
If you need to use FTP, use the user commands to create a login and password so you can
access the SNC from the Ethernet network.
page 244
timezone
"
"
tzSet "timezone"