ADIC Scalar 100 User Manual page 220

PCB Proto Recv-Q Send-Q Local Address
-------- ----- ------ ------ ------------------ ---------------
c1fee18c TCP
ESTABLISHED
c1fee40c TCP
c1fee58c TCP
c1fee68c TCP
c1feea0c TCP
c1fee48c UDP
value = 1 = 0x1
SN60023 >
initializeBox
The initializeBox command removes configuration files, such as management
configuration and SCSI device maps, and then prompts to reboot.
ipstatShow
The ipstatShow command displays Internet protocol statistics for the Ethernet
network. Interpreting these statistics requires detailed knowledge of Internet networking
protocols. This information may be useful to the LAN administrator.
SN60023 > ipstatShow
total 8380
badsum 0
tooshort 0
toosmall 0
badhlen 0
badlen 0
fragments 0
fragdropped 0
fragtimeout 0
forward 0
cantforward 0
redirectsent 0
value = 1 = 0x1
SN60023 >
page 206
0 0 192.168.1.59.23 206.0.64.117.4239
0 0 0.0.0.0.52787
0 0 0.0.0.0.21
0 0 0.0.0.0.23
0 0 0.0.0.0.513
0 0 0.0.0.0.161
Attention: Use this function with care as data may be lost as a result of
devices moving to different LUNs when the mapping database is removed.
Make sure all I/O has been stopped.
Foreign Address (state)
0.0.0.0.0 LISTEN
0.0.0.0.0 LISTEN
0.0.0.0.0 LISTEN
0.0.0.0.0 LISTEN
0.0.0.0.0
initializeBox