values can be determined by looking at the "Id" column in the output of the sfmShow -
1 command.
SN60023 > sfmConnectionSet 1,"ScsiPort2 [0:0:0] (QLA2100)"
value = 0 = 0x0
SN60023 >
sfmFeatureEnable
The sfmFeatureEnable command enables the SFM feature. Each license key is
unique for each SNC serial number. If the feature is factory-enabled you can specify
"enable" rather than an actual license key.
sfmHelp
The sfmHelp command displays a list of the Scalar Firewall Manager commands.
SN60023 > sfmHelp
sfmAccessApply
sfmAccessClear <disable code>
sfmAccessSet [host index],<starting lun>,<ending lun>,<access>
sfmActiveSet
sfmConnectionSet [host index],"host connection string"
sfmFeatureEnable "license key string"
sfmHostShow [host index]
sfmInactiveSet
sfmNameSet [host index],"name string"
sfmShow [host index]
sfmSparseAccessSet [host index],"LUN string"<access>
sfmTypeSet [host index]"OS type string"
See User's Guide for more information
value = 0 = 0x0
SN60023 >
sfmHostShow [hostIndex]
The sfmHostShow command displays all known Scalar Firewall Manager information
for the specified host connection index. The LUN access map is displayed as 16 rows of
16 bytes, one byte for each LUN.
page 228
license key string
"
hostIndex is the Id obtained from the sfmShow command.
00 in the LUN Access map indicates the host has no access to the LUN
01 in the LUN Access map indicates the host has access to the LUN
"
sfmFeatureEnable "license key string"