ADIC Scalar 100 User Manual page 257

0 persist timeout
1 keepalive timeout
1 keepalive probe sent
0 connection dropped by keepalive
value = 36 = 0x24 = '$'
SN60023 >
trapDestAdd
The trapDestAdd command allows you to add an ethernet address as a trap recipient to
the SNMP trap destination table that is maintained within the SNC. When the ADIC
Management Console is running, it inserts its address into the table automatically. The
broadcast address for the Ethernet port is also automatically included in the table.
SN60023 > trapDestAdd 192.168.1.75
value = 0 = 0x0
SN60023 >
trapDestRemove
The trapDestRemove command allows you to remove an ethernet address as a trap
recipient from the SNMP trap destination table that is maintained within the SNC. When
the ADIC Management Console is running, it inserts its address into the table
automatically. The broadcast address for the Ethernet port is also automatically included in
the table.
SN60023 > trapDestRemove "10.0.0.2"
value = 0 = 0x0
SN60023 >
trapDestShow
The trapDestShow command allows you to view the SNMP trap destination table
maintained within the SNC. When the ADIC Management Console is running, it inserts its
address into the table automatically. The broadcast address for the Ethernet port is also
automatically included in the table.
SN60023 > trapDestShow
Trap Destination IP Address
---------------------------
192.168.30.255
206.0.64.17
206.0.64.25
206.0.64.35
206.0.64.255
value = 1 = 0x1
SN60023 >
trapDestAdd "ipAddress"
ipAddress
" "
ipAddress
" "
page 243