ADIC Scalar 100 User Manual page 38

Table 2-1: Pre-Installation Steps
Step
3
4
5
6
page 24
Customer Action or Decision
If you will be connecting more than
one host to the SNC and you want
to use the Scalar Firewall Manager
access option, be sure you have the
necessary license.
If you are using Scalar Firewall
Manager, install the Host
Registration Service on the hosts
that will be connected to the SNC.
Ensure that all host Fibre Channel
cables
° Have been ordered with the
product or
° Have been preinstalled and
checked
° Are labelled with:
---Host system identifier
---Scalar 100 tape library system
identifier.
Label both ends of each SCSI cable
with:
° Drive ID and SNC connector
number.
Comments and References
See "Access Options" on page 74.
For Windows NT/Windows 2000, see
"Installing the SAN Explorer and Host
Registration Service" on page 37.
For Solaris, AIX and other platforms, see
"Installing the Host Registration Service"
on page 37.
Refer to the HBA Specification provided
with your HBA.
None.
Pre-installation Checklist