ADIC Scalar 100 User Manual page 246

.. Shell is now locked
SN60023 > shellLock 0
value = 1 = 0x1
showBox
The showbox command displays components of the SNC using characters to form a
picture of the unit, as viewed from the back of the SNC:
SN60023 > showBox
Back _________________________________________
/
/
/
/
/========================================/
|
|
|
| [LVDT]
| SCSI1
|________________________________________|/
LVDT = SCSI Low Voltage Differential - Terminated
SW-2 = Short Wave - Two GB
value = 0 = 0x0
SN60023 >
The abbreviations used in the drawing are explained in the legend immediately below the
drawing.
showVersions
The showVersions command displays the version of the operational firmware,
Power-On-Self-Test (POST), Bootrom and Alternate Bootrom.
SN600726 > showVersions
ADIC Scalar Storage Network Controller Firmware-4
Version 0404.05 Built Oct 19 2001, 14:40:29 on 5xame by jsmyder
POST
Bootrom
Alt Bootrom
value = 0 = 0x0
SN600726 >
page 232
FC1
[SW-2]
[LVDT] [LVDT]
SCSI2 SCSI3
version v040405
version v040405
version v040405
/ |
/
/
FC2 |
[SW-2] |
|
[LVDT] | /
SCSI4 | /
/|
|
|
|
|
/
/
Front
showBox