Snmp Community Strings; Scsi Channel; Figure 3-53: Snmp Community Strings - ADIC Scalar 100 User Manual

SNMP Community Strings

This menu option will display a dialog (Figure 3-53) that allows you to modify the SNMP
community strings for the ADIC Management Console. They are stored on the Server.

Figure 3-53: SNMP Community Strings

SNMP community strings serve to group network devices into logical collections for
management purposes. The community strings on the ADIC Management Console Server
must match those on the SNC you wish to manage. The default settings do match.
To change settings on the SNC, use the snmp...suite of Service Port commands beginning
on page 233. To view or edit strings defined for the ADIC Management Console Server,
highlight the SNC in Tree View, choose Controls > SNMP Community Strings and
make any necessary changes. There are three different strings:
Read allows the ADIC Management Console to get information from SNCs with
matching Read community strings.
Write allows the ADIC Management Console to manipulate the settings of SNCs with
matching Write community strings.
Trap allows the ADIC Management Console to receive Trap messages from SNCs with
matching Trap community strings.

SCSI Channel

If you have administrator privileges, you may change a SCSI Channel's configuration by
selecting the channel in Tree View and then using the Controls pull-down menu item
(Controls > SCSI Channel) to open the SCSI Channel Parameters dialog box. You can
also open this dialog box by selecting the appropriate SCSI Channel in Tree View and then
using the right-click menu. SCSI Channel is the seventh option in the list. See Figure 3-
page 79
Controls Menu Group