ADIC Scalar 100 User Manual page 211

fcTxDisable [port]
The fcTxDisable command disables a Fibre Channel port transmitter.
Port
SN60023 > fcTxDisable 1
value = 0 = 0x0
SN60023 >
fcTxEnable [port]
The fcTxEnable command enables or re-enables a Fibre Channel port transmitter.
Port
SN60023 > fcTxEnable 1
value = 0 = 0x0
SN60023 >
gateAddrGet
The gateAddrGet command displays the default network gateway address if one has
been set. This address is used when connections are made to a different subnet and there
are no explicit routes defined for that subnet. Consult your network administrator for more
information on the default gateway (sometimes referred to as default router) address.
SN60023 > gateAddrGet
Gateway Address set to 192.168.1.1
value = 0 = 0x0
SN60023 >
gateAddrSet
The gateAddrSet command changes the default network gateway address. This
address is used when connections are made to a different subnet and there are no explicit
fcTxDisable [port]
Parameter Value
1
2
Parameter Value
1
2
Meaning
The SNC Connection labeled FC1
The SNC Connection labeled FC2
Meaning
The SNC Connection labeled FC1
The SNC Connection labeled FC2
page 197