ADIC Scalar 100 User Manual page 212

routes defined for that subnet. Consult your network administrator for more information
on the default gateway (sometimes referred to as default router) address.
Successful gateAddrSet
SN60023 > gateAddrSet "10.0.0.1"
value = 0 = 0x0
SN60023 >
Failed gateAddrSet (1)
The folowing message is received when trying to set a new gateway address and that
address is currently unreachable. The following message is sent to the terminal.
SN600726 > gateAddrSet "10.0.0.1"
gateAddrSet: Error setting current gate addr:
S_errno_ENETUNREACH
value = -1 = 0xffffffff = payloadChecksum + 0xffd418a3
The new gateway address is written to the bootup parameters to be used at the next boot. If
at next boot, the address is reachable, then it will be written to the system file. If at next
boot the gateway address is not reachable and therefore not written to the system file, the
following message is displayed:
Failed gateAddrSet (2):
SN600726 > gateAddrSet "172.16.76.1"
gateAddrSet: Error deleting old gateway addr: S_errno_ESRCH
Gateway Address set to 172.16.76.1 for Ethernet interface
value = 0 = 0x0
SN600726 >
help
The help command displays a list of the shell commands.
SN60023 > help
help Print this list
cleHelp Print Command Log Entry info
diagHelp Print Diagnostic Help info
hlthChkHelp Print Health Check Help info
page 198
help