ADIC Scalar 100 User Manual page 217

200.0.0.47 fred
SN60023 > host "delete", "plato"
SN60023>
host list
"
The host " list " command prints the content of the hosts file.
The host utilities maintain a host file, nvfs:/mgnt/hosts, which is used at system
startup to initialize the network hosts table. This table associates network names with IP
addresses. Use of the hosts table is entirely optional, but might facilitate frequently
needed connections. Each host entry is a single line of the format:
P-address
where
The following is an example of host file contents.
SN60023 > host "list"
192.168.1.90 bruno
200.0.0.42 socrates
200.0.0.45 plato
200.0.0.47 fred
value = 0 = 0x0
SN60023 >
hostNameSet
The hostNameSet command changes the network name of the SNC. The shell prompt
will be set to the new host name.
SN60023 > hostNameSet "foster"
Target hostname set to foster
value = 0 = 0x0
foster >
host "list"
"
official_host_name
IP-address is a text string in standard IP Address format (i.e.,
10.0.0.2).
official_host_name is the first name selected for this host.
nicknames is an optional list of additional aliases for the host
(separated by spaces).
nicknames ...
page 203